Electrospinning was used to produce poly(vinyl alcohol) (PVA)-based nanofibers containing nerolidol (NER) as the antimicrobial agent. The scanning electron microscopy results indicated the formation of homogeneous fibers in the absence of NER. However, its incorporation into the fiber prevented the complete solvent evaporation, ultimately leading to the coalescence of the fibers. It became more evident as the amount of NER increased from 0 to 50% m/v. The incorporation of NER also decreased the crystallinity of the fibers from 10 to ca. 6.5%. However, this decrease was not proportional to the concentration of NER. The contact angle results confirmed the presence of NER molecules on the surface of the fibers especially due to the increase of the contact angle from 0 (PVA/NER0) to 27.8º (PVA/NER50). The fibrous mats exhibited good antimicrobial activity, being even more efficient than the control in some cases, suggesting their potential for wound-dressing purposes.

The electrospinning has been widely used in tissue engineering for the preparation of wound dressing with the most varied polymers and drugs. Considering that propolis has antimicrobial and anti-inflammatory characteristics, the aim was to develop electrospun fibers from PBAT (poly (butylene-adipate-co-terephthalate)/PCL (poly(ε-caprolactone) containing propolis in order to promote antimicrobial action and the healing of wounds. By the optical microscopy analysis, the best parameter for obtaining the fibers was chosen: 16.5% (v/v) of propolis extract alcoholic solution, 14.0 cm needle-collector distance, 17.0 kV of voltage and 0.5 mL h-1 flow rate. The scanning electron microscopy demonstrated fiber diameters of 0.51 ± 0.12 μm for the polymer blend and 1.16 ± 0.98 μm for the blend with propolis. The Fourier transform infrared spectroscopy (FTIR) results showed no evidence of chemical interaction with propolis, this being a physical interaction. This interaction was corroborated by the differential scanning calorimetry (DSC) due to the variation in the heats involved, mainly in the aromatic part of the polymer blend, indicating a better interaction in the PBAT group. Finally, it was found that fibers presents propolis antimicrobial activity against the bacteria Pseudomonas Aeruginosa. The results indicate that this blend has a great potential to be used as a cutaneous dressing.

RESUMO O cromo é um metal tóxico amplamente utilizado em processos industriais, por isso a constante preocupação com os efluentes líquidos gerados. Uma vez lançados sem o devido tratamento podem comprometer a qualidade do corpo receptor. Este trabalho teve por objetivo analisar o processo de biossorção na remoção de íons Cr(III) de soluções aquosas sintéticas e efluente de curtume utilizando como biossorvente a macrófita aquática Pistia stratiotes in natura (PN) e quimicamente modificada (PM) com hidróxido de sódio e ácido cítrico. Realizou-se o preparo, a caracterização dos biossorventes e os experimentos de biossorção. Os estudos de equilíbrio indicaram que a capacidade máxima de biossorção foi de 58,16 e 19,80 mg g-1 para PM e PN, respectivamente. Nos testes utilizando efluente bruto de curtume, a remoção de cromo foi de 28,26% para ambos os biossorventes, e no efluente da lagoa de tratamento biológico, a maior taxa de remoção do metal foi obtida pelo biossorvente PM, com 65,44%. Os resultados demonstraram que a utilização de P. stratiotes como biossorvente apresenta-se como uma alternativa eficaz e de baixo custo, porém estudos complementares são necessários a fim de avaliar sua aplicação em escala real.

ABSTRACT Chromium is a toxic metal widely used in industrial processes, so the concern with the liquid effluents generated is constant, that once released without proper treatment can compromise the quality of the receiver body. The study aimed at analyzing the process of biosorption in removing Cr(III) ions of synthetic aqueous solutions and tannery effluent using as biosorbent the Pistia stratiotes macrophyte in natura (PN) and chemically modified (PM) with sodium hydroxide and citric acid. The preparation, characterization of the biosorbents and the experiments of biosorption were performed. Equilibrium studies indicated that the maximum biosorption capacity for PM was 58.16 mg g-1 and 19.80 mg g-1 for PN. In the tests using raw effluent from tannery, chromium removal was 28.26% for both biosorbents, and in the effluent from biological treatment lagoon, the higher rate of metal removal was obtained by biosorbent PM with 65.44%. The results showed that the use of P. stratiotes as biosorbent may be an effective and low-cost alternative and that additional studies are needed to assess its full-scale application.

O presente trabalho avaliou a capacidade de adsorção do corante azul de metileno nos resíduos da palha de milho e da bainha do palmito pupunha in natura. A caracterização dos resíduos foi determinada utilizando-se a microscopia eletrônica de varredura e espectroscopia na região do infravermelho a qual indicou a presença de grupos carboxílicos, hidroxila e carbonila. O tempo necessário para que o sistema atingisse o equilíbrio para ambos os resíduos foi de 240 min, seguindo uma cinética descrita pelo modelo de pseudo-segunda ordem. A capacidade máxima de adsorção foi de 102,8 mg g-1 para o resíduo da palha de milho, seguindo o modelo de isoterma de Langmuir e 50,9 mg g-1 para o resíduo de palmito pupunha, sendo que o modelo que melhor se ajusta foi Freundlich. Desta forma, esses resíduos são promissores para a adsorção do corante azul de metileno em efluentes.

This study evaluated the ability of adsorption of methylene blue dye in waste of corn straw and sheath of palmetto pupunha in natura. The characterization of the waste was performed using MEV and spectroscopy in the infrared region, which indicated the presence of carboxyl groups, hydroxyl and carbonyl. The time required for the system to reach equilibrium for both residues was approximately 240 min, following the kinetics of pseudo-second order. The maximum adsorption capacity was 102.8 mg g-1 for corn straw, following the isotherm model of Langmuir and 50.9 mg g-1 for the residue of the sheath of palmetto pupunha, following the isotherm model of Freundlich. Thus, the wastes are promising for adsorption of methylene blue dye in effluents.

Objetivou-se, neste trabalho, analisar a eficiência de resíduos de macadâmia (mesocarpo e endocarpo) com e sem modificações químicas na biossorção de íons cobre II. As modificações químicas no biossorvente foram realizadas com hidróxido de sódio (NaOH) e com NaOH mais ácido cítrico e comprovadas por espectroscopia na região do infravermelho, pela presença dos picos em 1710 e 1420 cm-1 como também pela microscopia eletrônica de varredura (MEV) observando-se aumento da rugosidade na superfície. Os melhores resultados de biossorção foram para o mesocarpo modificado com NaOH, em pH igual a 5. O tempo de equilíbrio adsorvente-adsorbato foi de 140 min; além disto, o sistema seguiu um modelo cinético de pseudo-segunda ordem e a capacidade máxima de biossorção foi de 28,82 mg g-1. As isotermas para os resíduos modificados com NaOH seguiram o modelo de Langmuir e as modificadas com ácido se ajustaram ao modelo de Freundlich. Constatou-se que o processo de biossorção foi espontâneo energeticamente devido aos valores negativos para a energia de Gibbs. Comprovou-se, então, que o adsorvente possui alta capacidade de dessorção; assim, este material poderá ser novamente reutilizado; portanto, este resíduo poderá, futuramente equipar, filtros para remoção de Cu2+.

The objective was to analyze the efficiency of macadamia waste with and without chemical changes in biosorption of copper II (Cu2+). The chemical changes in the biosorbent with sodium hydroxide (NaOH) and with NaOH and citric acid were evidenced by infrared spectroscopy by the appearance of peaks in 1710 and 1420 cm-1 and by scanning electron microscopy, observed an increase of roughness on the surface. The best results of the adsorption were observed in mesocarp modified with NaOH, in pH equal to 5. An equilibrium time adsorbent - adsorbate was 140 min, in addition, the system followed a kinetic model of pseudo-second order and the maximum adsorption capacity was 28.82 mg g-1. The isotherms for the residues modified with NaOH followed the Langmuir model and the modified with acid were adjusted to the Freundlich model. It was found that the adsorption process was energetically spontaneous due to negative values for the Gibbs energy and the adsorbent has a high capacity of desorption, so this material can be reused. Therefore, this residue is an excellent material to equip future filters for removal of copper II.

The present paper focuses on improving chromium (III) uptake capacity of sugarcane bagasse through its chemical modification with citric acid and/or sodium hydroxide. The chemical modifications were confirmed by infrared spectroscopy, with an evident peak observed at 1730 cm-1, attributed to carbonyl groups. Equilibrium was reached after 24 h, and the kinetics followed the pseudo-second-order model. The highest chromium (III) maximum adsorption capacity (MAC) value was found when using sugarcane bagasse modified with sodium hydroxide and citric acid (58.00 mg g-1) giving a MAC value about three times greater (20.34 mg g-1) than for raw sugarcane bagasse.

In this article, films were produced with six types of cassava's starch mixed with gelatin and plasticized with sorbitol. These films were used in covering of grapes 'Benitaka' (Vitis vinifera L.) as biodegradable packaging. The acetylated starch film showed the best results in solubility, thickness and homogeneity, besides the less water loss the fruit, resulting in better coverage, increasing the shelf life fruits in 12 days. These results demonstrate the great potential of using films in food conservation, adding value to agricultural activity and helping to reduce non-biodegradable plastics in the environment.

No presente trabalho, foi investigado o comportamento do extrato aquoso e alcoólico da beterraba (Beta vulgaris) como um indicador ácido-base, tendo como objetivo principal despertar o interesse pelo uso dos indicadores naturais, como alternativa didática para transmissão dos conceitos de titulação, equilíbrio químico e a lei de Lambert-Beer. Para a realização dos experimentos foram utilizadas soluções padrão de ácido clorídrico (HCl), ácido acético e hidróxido de sódio (NaOH). Inicialmente foram feitos testes para avaliar a reversibilidade do sistema, e observou-se que a coloração passa de vermelho para amarela com adição de base e retorna para vermelho com adição do ácido, sendo possível sua utilização para explicação do equilíbrio químico. As análises de espectroscopia UV-vis mostraram que os espectros de absorção molecular na região do visível, apresentam diferentes característica, dando indícios que ocorreu modificação na estrutura do indicador em meio ácido e básico. Após as análises volumétricas constatou-se que os pontos de equivalência determinados com o indicador natural tiveram concordância com os obtidos pelo método potenciométrico. Além disso, os extratos aquosos e alcoólicos da beterraba apresentam potencial didático para a explicação da lei de Lambert-Beer, sendo que no meio ácido houve uma melhor correlação comparado com o meio básico.

In this study, we investigated the behavior of aqueous and alcoholic extract of sugar beet (Beta vulgaris) as an acid-base indicator, having as main objective the awakening interest in the use of natural indicators as an alternative to teaching of concepts of titration, equilibrium chemical and the law of Lambert-Beer. For the experiments we used standard solutions of hydrochloric acid (HCl), acetic acid and sodium hydroxide (NaOH). Initially tests were performed to evaluate and reversibility of the system, and it was observed that the color changes from red to yellow with the addition of base and returns to red with acid addition, so can be used to explain the chemical equilibrium. The analysis of UV-vis spectra showed that the molecular absorption in the visible region, have different characteristics, giving evidence that was altered structure of the indicator in acidic and basic medium. After the titration was found that the points of equivalence with the natural indicator showed concordance with those obtained by potentiometric method. Furthermore, the aqueous and alcoholic extract of beet has a good correlation for Beer-Lambert law, being that the acidic medium presented a better correlation compared with basic.

As proporções dos confôrmeros axial-equatorial do N,N-dimetilcarbamato de cicloexila foram determinadas, pela primeira vez, pelo método de Eliel, pela ressonância magnética nuclear dinâmica(rmnd) de ¹H e de 13C e foram comparados com resultados obtidos através de cálculos teóricos. Pelo método de Eliel foram utilizados pelo menos cinco parâmetros experimentais independentes, em CCl4, CDCl3 e CD3CN. Os experimentos de ¹H e de 13C a baixas temperaturas foram realizados em CF2Br2/CD2Cl2. Os métodos semiempíricos MNDO, AM1 e PM3 e cálculos ab initio de orbital molecular nos níveis HF/STO-3G e HF/6-31G(d,p) também foram utilizados. Tanto os métodos que utilizaram a RMN como os cálculos teóricos corretamente indicaram a preferência do confôrmero equatorial em relação ao axial e os valores obtidos pelos diferentes métodos demonstraram boa concordância.

Axial-equatorial conformational proportions for cyclohexyl-N,N-dimethyl carbamate have been measured, for the first time, by the Eliel method, ¹H and 13C dynamic nuclear magnetic resonance (DNMR). The results were compared against those determined by theoretical calculations. By the Eliel method at least five experimentally independent measureables were used in CCl4, CDCl3 and CD3CN. The ¹H and 13C low temperature experiments were performed in CF2Br2/CD2Cl2 . Semiempirical methods MNDO, AM1 and PM3 and ab initio molecular orbital calculations at the HF/STO-3G and HF/6-31G(d,p) levels have been performed on the axial and equatorial conformers populations. All applied methods correctly predict the equatorial conformer preference over the axial one. The resulting equatorial preferences determined by NMR data and theoretical calculations are in good agreement.